RE: [CAD_CAM_EDM_DRO] EMC BDI

You need to make a boot diskette. Use the rawrite utility in the dosutils
directory from a windows machine to create the boot floppy.

Tim
[Denver, CO]

> -----Original Message-----
> Hi;
> does any one knows how to install EMC BDI without the booting
> from the cd rom?
> any help will be appreciated.
> regards
> mariano
>
>
> Tim Goldstein wrote:
>
> > Just did a dual boot install using the "Expert" option of the BDI disk.
> > Required a few more choices and some a little knowledge (basically what
> > partitions to make) of Linux. I now have a machine that boots
> to Win98 for
> > DeskNC Windows and to Linux for EMC. Have network connectivity
> working with
> > Linux just fine. The install took about 40 minutes. Hope to
> hook it up to
> > Bridgett this weekend and see how she looks with coordinated moves. If I
> > really get carried away I will try to find out if I get a performance
> > difference between DeskNC Windows and EMC.
> >
> > Tim
> > [Denver, CO]
> >
> > > -----Original Message-----
> > > I just did a brain dead install today, the name fits well, as it was
> > > totally painless. Took about 40 minutes or so. I used a SCSI CD
> > > Rom drive with an IDE hard drive. Much easier than doing it the
> > > old way, and the KDE desktop is miles ahead of anything that
> > > came with RH 5.2. The best part of it is, whenever my mouse
> > > arrow touches the side of the screen the whole thing does not
> > > shift to one side. Those who used the old version will know what
> > > I mean by that.
> > >
> > > I have not hooked it to my machine yet, so I do not know if the
> > > performance will be as good as with RH 5.2 but I'll find out
> > > tomorrow. Hope so
> > >
> > > Bill
> > >
> > > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for
> the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
> >
> > Addresses:
> > Post message: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> > FAQ: http://www.ktmarketing.com/faq.html
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/


Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
Post message: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager

FAQ: http://www.ktmarketing.com/faq.html

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/