Re: My Drill/Mill has arrived!!
Posted by
cadman@p...
on 2001-05-03 16:21:53 UTC
Alan,
Can you be more specific about the ball screw conversion for the
Y-axis? Did you let the far end hang without a bearing block like it
is when it arives? On the Z-axis mounting. You did not use the
existing rack and pinion assembly? Do you have any sketches on your
ball screw conversion?
CADMAN
Can you be more specific about the ball screw conversion for the
Y-axis? Did you let the far end hang without a bearing block like it
is when it arives? On the Z-axis mounting. You did not use the
existing rack and pinion assembly? Do you have any sketches on your
ball screw conversion?
CADMAN
--- In CAD_CAM_EDM_DRO@y..., allan_r9@h... wrote:
> Hi Jeff,
>
> Since I ordered my Mill/Drill without the stand from Enco, I built
my
> own with structural tubing for legs and a 12GA top/drip tray. I
just
> cut out a rectangle under the machine base, staying inside the mount
> pattern. If I want to use flood coolant, I can just seal around the
> base to the tray. There is no way to install a nut mount for the Y
> axis without having access to the bottom of the base. I also
> converted to CNC 3 axis, with the 4th on the way, and things are
> running very well. By the way, for the Z axis, a NEMA34 frame will
> fit nicely up inside the casting behind the quill to power a
> leadscrew connected to the quill collar.
>
> Enjoy,
> Allan
>
?
> > >
> > > Jeff aka CADMAN
Discussion Thread
cadman@p...
2001-04-26 08:24:43 UTC
My Drill/Mill has arrived!!
Joel Jacobs
2001-04-26 10:40:43 UTC
Re: [CAD_CAM_EDM_DRO] My Drill/Mill has arrived!!
cadman@p...
2001-04-26 11:28:43 UTC
Re: My Drill/Mill has arrived!!
Henry H. Armstrong
2001-04-26 19:56:36 UTC
Re: [CAD_CAM_EDM_DRO] My Drill/Mill has arrived!!
Sven Peter, TAD S.A.
2001-04-26 20:17:53 UTC
Re: [CAD_CAM_EDM_DRO] My Drill/Mill has arrived!!
Alan Marconett KM6VV
2001-05-01 22:09:32 UTC
Re: My Drill/Mill has arrived!!
allan_r9@h...
2001-05-03 04:46:10 UTC
Re: My Drill/Mill has arrived!!
cadman@p...
2001-05-03 16:15:23 UTC
Re: My Drill/Mill has arrived!!
cadman@p...
2001-05-03 16:21:53 UTC
Re: My Drill/Mill has arrived!!
Alan Marconett KM6VV
2001-05-03 18:08:57 UTC
Re: My Drill/Mill has arrived!!
allan_r9@h...
2001-05-03 18:52:31 UTC
Re: My Drill/Mill has arrived!!
cadman@p...
2001-05-03 19:26:18 UTC
Re: My Drill/Mill has arrived!!
cadman@p...
2001-05-04 18:43:20 UTC
Re: My Drill/Mill has arrived!! -Allan-
allan_r9@h...
2001-05-04 21:12:21 UTC
Re: My Drill/Mill has arrived!! -Allan-