Re: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Posted by
Marty Escarcega
on 2001-05-04 15:46:02 UTC
What kind of current capacity John? You want to start exporting
them? :-)
Marty
them? :-)
Marty
On 4 May 2001, at 19:16, John Stevenson wrote:
> Don't know if this info is relevant to the US but here in the UK we
> have 240 to 110v transformers for using power tools on site. These
> come in various outputs as regards aperage. Usually 2Kva to 6KVA what
> ever that means. These are very heavy and encapsulated in usually a
> yellow plastic case, made to be dropped from scaffolding on a building
> site - no I'm not joking. Inside they have a centre tapped secondary
> so you get 50v - 0 - 50v. 50 x 1.4 for a full wave DC supply will give
> you 70v DC. Good thing about these is they are plentyfull. Any car
> boot sale will reveal at least 4 and the going price is usually 20 to
> 25 UKP each, sometimes less. Do you have something like this in the
> US??
>
> John Stevenson
Discussion Thread
Jon Elson
2001-05-03 21:47:18 UTC
Re: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Marty Escarcega
2001-05-03 22:19:54 UTC
Re: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Alan Marconett KM6VV
2001-05-03 23:37:59 UTC
Re: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Jon Elson
2001-05-03 23:42:48 UTC
Re: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Tim Goldstein
2001-05-04 06:32:42 UTC
RE: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Marty Escarcega
2001-05-04 07:23:29 UTC
RE: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
Joel Jacobs
2001-05-04 08:14:25 UTC
Re: [CAD_CAM_EDM_DRO] Thoughts on PC Based Control Retrofit....pictures of the specimen
John Stevenson
2001-05-04 12:17:37 UTC
Re: Thoughts on PC Based Control Retrofit....now transformers.
Marty Escarcega
2001-05-04 15:46:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Ian Wright
2001-05-04 15:56:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Carol & Jerry Jankura
2001-05-04 16:59:17 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Doug Harrison
2001-05-04 18:35:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Carol & Jerry Jankura
2001-05-04 21:51:55 UTC
RE: [CAD_CAM_EDM_DRO] Re: Thoughts on PC Based Control Retrofit....now transformers.
Marty Escarcega
2001-05-08 03:42:02 UTC
Thoughts on PC Based Control Retrofit....Power Supply, advice?
admin@a...
2001-05-08 10:43:42 UTC
Re: Thoughts on PC Based Control Retrofit....Power Supply, advice?