Re: GEM-500PCN bedmill - CNC ready
Posted by
ballendo@y...
on 2001-05-24 20:34:48 UTC
Smoke,
Following the link in your message (re-posted below) I see different
specs than you are referring to:
iso-30 spindle
That machine has travels of 500x350x450 and net wt. is 900kg. This
would be travels of about 20x 14 x 18 inches (XYZ) and a shipping
weight of 2200 lbs. The specs say 1000kg gross. I assume that is the
shipping wt.
Hope this helps.
Ballendo
Following the link in your message (re-posted below) I see different
specs than you are referring to:
iso-30 spindle
That machine has travels of 500x350x450 and net wt. is 900kg. This
would be travels of about 20x 14 x 18 inches (XYZ) and a shipping
weight of 2200 lbs. The specs say 1000kg gross. I assume that is the
shipping wt.
Hope this helps.
Ballendo
--- In CAD_CAM_EDM_DRO@y..., "Smoke" <gordonr@r...> wrote:
> I've been checking out the specs on that machine.
>
> It appears to be a fairly HEAVY duty machine.
> The weight is listed at 15000 KG (33,000 lb) for the "small"
machine! At
> 33,000 pounds, <snip
> Smoke
>
> >http://www.handyage.com.tw/pic/metal/4-1.htm
> >
> >At the bottom of the page is a photo, some drawings
> >and specs.
> >
> >Bill
> >
> >
Discussion Thread
David M. Munro
2001-05-21 05:56:43 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
William Scalione
2001-05-21 11:34:58 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Jerry Kimberlin
2001-05-21 18:01:52 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Doug Harrison
2001-05-22 19:42:59 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Jerry Kimberlin
2001-05-22 20:02:44 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 08:46:47 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
William Scalione
2001-05-23 13:13:21 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 16:14:41 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Mike Gann
2001-05-23 16:35:23 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
William Scalione
2001-05-23 16:50:42 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 16:52:56 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Mike Gann
2001-05-23 16:59:52 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Jerry Kimberlin
2001-05-23 17:29:49 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
dougrasmussen@c...
2001-05-23 17:31:39 UTC
Re: GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 19:21:14 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 19:40:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready
Jerry Kimberlin
2001-05-23 20:02:34 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Smoke
2001-05-23 20:36:03 UTC
Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready
Jon Elson
2001-05-23 20:44:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready
dougrasmussen@c...
2001-05-23 22:52:17 UTC
Re: GEM-500PCN bedmill - CNC ready
Jon Elson
2001-05-24 10:25:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready
Smoke
2001-05-24 12:06:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready
ballendo@y...
2001-05-24 20:34:48 UTC
Re: GEM-500PCN bedmill - CNC ready
ballendo@y...
2001-05-24 20:40:10 UTC
Re: GEM-500PCN bedmill - CNC ready
ballendo@y...
2001-05-24 21:08:03 UTC
Re: GEM-500PCN bedmill - CNC ready
dougrasmussen@c...
2001-05-24 21:14:17 UTC
Re: GEM-500PCN bedmill - CNC ready
Ward M.
2001-05-25 01:07:44 UTC
RE: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready
Smoke
2001-05-28 10:29:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready