CAD CAM EDM DRO - Yahoo Group Archive

Re: GEM-500PCN bedmill - CNC ready

Posted by ballendo@y...
on 2001-05-24 20:40:10 UTC
Doug,

I agree with the buyer beware part...

However, it is fairly common for an asian machine to be better than
its english documentation.

I would want to know what the rapid is, as I agree , 79IPM is too
slow. It also doesn't make sense for it to be that slow, which is why
I suspect a translation error.

Hope this helps.

Ballendo

--- In CAD_CAM_EDM_DRO@y..., dougrasmussen@c... wrote:
> Guys,
>
> I checked out the specs for the above mill. Errors in their
> specifications!!!! As I mentioned several weeks ago, this may be a
> clue as to the overall quality of a machine.
>
> They note the feedrate at 2000mm/rev for the CNC version. Do they
> mean 2000mm/min, which would translate to 79/min? 79 in/min is
> painfully slow, if that's the correct value, why can this machine
> only go that fast?
>
> Buyer beware....
>
> Doug

Discussion Thread

David M. Munro 2001-05-21 05:56:43 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready William Scalione 2001-05-21 11:34:58 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Jerry Kimberlin 2001-05-21 18:01:52 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Doug Harrison 2001-05-22 19:42:59 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Jerry Kimberlin 2001-05-22 20:02:44 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 08:46:47 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready William Scalione 2001-05-23 13:13:21 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 16:14:41 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Mike Gann 2001-05-23 16:35:23 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready William Scalione 2001-05-23 16:50:42 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 16:52:56 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Mike Gann 2001-05-23 16:59:52 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Jerry Kimberlin 2001-05-23 17:29:49 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready dougrasmussen@c... 2001-05-23 17:31:39 UTC Re: GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 19:21:14 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 19:40:10 UTC Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready Jerry Kimberlin 2001-05-23 20:02:34 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Smoke 2001-05-23 20:36:03 UTC Re: [CAD_CAM_EDM_DRO] GEM-500PCN bedmill - CNC ready Jon Elson 2001-05-23 20:44:43 UTC Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready dougrasmussen@c... 2001-05-23 22:52:17 UTC Re: GEM-500PCN bedmill - CNC ready Jon Elson 2001-05-24 10:25:31 UTC Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready Smoke 2001-05-24 12:06:52 UTC Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready ballendo@y... 2001-05-24 20:34:48 UTC Re: GEM-500PCN bedmill - CNC ready ballendo@y... 2001-05-24 20:40:10 UTC Re: GEM-500PCN bedmill - CNC ready ballendo@y... 2001-05-24 21:08:03 UTC Re: GEM-500PCN bedmill - CNC ready dougrasmussen@c... 2001-05-24 21:14:17 UTC Re: GEM-500PCN bedmill - CNC ready Ward M. 2001-05-25 01:07:44 UTC RE: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready Smoke 2001-05-28 10:29:55 UTC Re: [CAD_CAM_EDM_DRO] Re: GEM-500PCN bedmill - CNC ready