CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design.

on 2001-05-30 13:01:44 UTC
Hi Jeff,

I'm still not seeing any ballscrew pix! all show the "broken pix".
Also the four links come back as "not found". I'm running Netscape
4.7. Any Ideas? The other pix on the site come up great!

Alan KM6VV (in the dark!)



cadman@... wrote:
>
> I have finished drawing up a design using Solidworks. I have placed
> some pictures and drawings on my web site. Before I start to make
> the parts to do this conversion, I would like to get the groups input
> on the design.
>
> I did not show preloaded ballscrew nuts in the design, I figured I
> could add them if I was not happy with the tolerance that a single
> nut gives. The cost of the preloaded nut scared me away. My use of
> this machine will not be for business of any kind, just making parts
> for my entertainment.
>
> My web site is http://24.12.163.105/cnc/
>
> CADMAN

Discussion Thread

cadman@p... 2001-05-30 07:50:35 UTC Drill-Mill CNC conversion design. Hugh Prescott 2001-05-30 08:28:50 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. cadman@p... 2001-05-30 08:35:57 UTC Re: Drill-Mill CNC conversion design. Drew Rogge 2001-05-30 08:38:12 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. Carlos Guillermo 2001-05-30 09:33:29 UTC RE: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. cadman@p... 2001-05-30 10:34:03 UTC Re: Drill-Mill CNC conversion design. allan_r9@h... 2001-05-30 11:17:28 UTC Re: Drill-Mill CNC conversion design. cadman@p... 2001-05-30 11:49:11 UTC Re: Drill-Mill CNC conversion design. Hugh Currin 2001-05-30 12:28:15 UTC Re: Drill-Mill CNC conversion design. Alan Marconett KM6VV 2001-05-30 13:01:44 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. Randy Gordon-Gilmore 2001-05-30 13:14:00 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. Rich D. 2001-05-30 13:56:25 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. cadman@p... 2001-05-30 14:33:45 UTC Re: Drill-Mill CNC conversion design. Try Again :) Alan Marconett KM6VV 2001-05-30 15:57:39 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. Sven Peter, TAD S.A. 2001-05-30 20:52:54 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design. Joel Jacobs 2001-05-31 07:39:03 UTC Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design.