Re: [CAD_CAM_EDM_DRO] Drill-Mill CNC conversion design.

Jeff, Alan,
Same here. Nothing is coming across from Jeff's server on the Ballscrew page.
All links are dead as well. The front page is fine.
Rich D.

Alan Marconett KM6VV wrote:

>
> Hi Jeff,
>
> I'm still not seeing any ballscrew pix! all show the "broken pix".
> Also the four links come back as "not found". I'm running Netscape
> 4.7. Any Ideas? The other pix on the site come up great!
>
> Alan KM6VV (in the dark!)
>
> cadman@... wrote:
> >
> > I have finished drawing up a design using Solidworks. I have placed
> > some pictures and drawings on my web site. Before I start to make
> > the parts to do this conversion, I would like to get the groups input
> > on the design.
> >
> > I did not show preloaded ballscrew nuts in the design, I figured I
> > could add them if I was not happy with the tolerance that a single
> > nut gives. The cost of the preloaded nut scared me away. My use of
> > this machine will not be for business of any kind, just making parts
> > for my entertainment.
> >
> > My web site is http://24.12.163.105/cnc/
> >
> > CADMAN