CAD CAM EDM DRO - Yahoo Group Archive

Re: Coolant control.

on 2001-06-11 07:35:05 UTC
Hi Fitch,

I think you guys are making way too big a deal of the rust and
corroding effects of water based cutting fluids. Don't forget
they're used day in and day out on very, very high dollar machines.

I agree they will sometimes leave a brownish stain under vises and
fixtures, but it's usually not a major issue.

As to your use of hydraulic fluid/mineral spirits brew....why?
Doesn't that have tendency to wash the way lubricant off? Seems like
it would act somewhat as a solvent rather than cutting agent. If you
want to use a straight oil, why not an oil formulated with extreme
pressure additives designed for cutting? They come in all sorts of
varieties from high sulfur, clothes-staining browns to odorless,
clear. Of couse, they cost more than your brew, but would be
dramatically better.

thanks,

Doug


--- In CAD_CAM_EDM_DRO@y..., Fitch R. Williams <frwillia@p...> wrote:
>
> Well, this could be another whole kettle of fish, but I'm not using
> water based coolant. The stuff drives me nuts. Instead I use 19.95
> universal hydraulic fluid cut with mineral spirits enough to make it
> flow more easily. More oil, less spirits in summer. It isn't as
good
> as the water based stuff, but it sure won't rust or corrode the
> machine.
>
> I use pure cutting oil on the lathe - but just for threading,
> knurling, parting, and drilling. Turning is done dry 99% of the
time.
>
> Fitch
> In So. Cal.

Discussion Thread

Fitch R. Williams 2001-06-10 07:43:33 UTC Coolant control. Chris Stratton 2001-06-10 08:02:04 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Marcus & Eva 2001-06-10 08:28:01 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Fred Smith 2001-06-10 10:20:09 UTC Re: Coolant control. dougrasmussen@c... 2001-06-10 10:36:56 UTC Re: Coolant control. machines@n... 2001-06-10 11:51:15 UTC Re: Coolant control. Fitch R. Williams 2001-06-10 19:10:39 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Fitch R. Williams 2001-06-10 19:17:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Coolant control. Fitch R. Williams 2001-06-10 19:21:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Coolant control. Jon Elson 2001-06-10 19:50:24 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Jon Elson 2001-06-10 20:04:18 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Fitch R. Williams 2001-06-10 20:58:10 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Fitch R. Williams 2001-06-10 21:08:57 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. Jon Elson 2001-06-10 23:43:14 UTC Re: [CAD_CAM_EDM_DRO] Coolant control. machines@n... 2001-06-11 00:33:08 UTC Re: Coolant control. Fitch R. Williams 2001-06-11 05:02:19 UTC Re: [CAD_CAM_EDM_DRO] Re: Coolant control. dougrasmussen@c... 2001-06-11 07:35:05 UTC Re: Coolant control. Fitch R. Williams 2001-06-11 18:33:03 UTC Re: [CAD_CAM_EDM_DRO] Re: Coolant control.