CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Pinout for Shopmaster Servo2000 controller input connector

Posted by Dan Mauch
on 2001-06-14 06:32:32 UTC
As far a I know (and I am not the supplier of your servo system) that
Pin 2 is X step
Pin 3 is X dir
Pin 4 is Y step
Pin 5 is Y dir
Pin 6 is z step
And pin 7 is z dir
Pins18-25 are signal grounds.
Dan

-----Original Message-----
From: henry@... [mailto:henry@...]
Sent: Thursday, June 14, 2001 12:32 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Pinout for Shopmaster Servo2000 controller
input connector

I have recently purchased a Shopmaster Eldorado with CNC servo option
and am having some trouble getting the servos to move in a coherent
fashion.

A couple of calls and emails to the supplier (Advanced Innovation)
and a couple of emails to Shoptask requesting the pinout for the
parallel input connector to the Servo200 controller have yielded
zip...

I'd like to identify the step and direction pins in particular. I
have looked into the box, and the input junction board appears to have
some sort of isolation circuit on it, which prevents me from tracking
the traces back to the individual driver boards which have the header
connectors clearly identified for step and direction.

I am a mechanical not an E.E. and don't want to screw the controller
up in case it needs to go back.The unit comes with essentially zero
documentation.

Thanks in advance.

henry@...


Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.

Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager

FAQ: http://www.ktmarketing.com/faq.html

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/

Discussion Thread

henry@j... 2001-06-14 00:32:17 UTC Pinout for Shopmaster Servo2000 controller input connector Dan Mauch 2001-06-14 06:32:32 UTC RE: [CAD_CAM_EDM_DRO] Pinout for Shopmaster Servo2000 controller input connector henry@j... 2001-06-14 17:15:47 UTC Re: Pinout for Shopmaster Servo2000 controller input connector