CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Machining smooth Curves

Posted by Tom Eldredge
on 2001-06-20 12:00:05 UTC
Rab,

That is a pretty neat web site you have there. I found your links to be
very interesting too.

Do your scripts run with the Max program running in the background, or do
they stand alone?

Thanks,

Tom Eldredge
----- Original Message -----
From: <rab@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, June 19, 2001 6:20 PM
Subject: [CAD_CAM_EDM_DRO] Machining smooth Curves


> I really don't know that much about this subject, but have seen
> references to NURBS and bezier CAM controls, which sound very
> interesting for smooth, fast machining.
> I use bezier curve toolpaths prior to producing G-Code from them as a
> large number of small segments, outputting the actual curve would
> appear easier, more accurate and faster than converting to linear
> moves or even a series of arcs.
> It would seem to make sense to interpolate a curve at the time that
> the step/direction signals are being generated rather than at the G-
> code stage, as although the curve would still be composed of small
> linear steps, the resolution would be at the very limit of what your
> CNC machine could handle.
> Are there any motor driver control programs that work with curves
> instead ( or as well as G-Code ) ?
>
> Rab,
> Rainnea Graphics
>
> PS. I've put some more stuff on my web page if anyone's interested in
> my CNC Taig Mill: www.project.rainnea.com
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

rab@r... 2001-06-19 16:20:10 UTC Machining smooth Curves ballendo@y... 2001-06-20 02:32:30 UTC Re: Machining smooth Curves Tom Eldredge 2001-06-20 12:00:05 UTC Re: [CAD_CAM_EDM_DRO] Machining smooth Curves rab@r... 2001-06-20 16:25:26 UTC Re: Machining smooth Curves Art Fenerty 2001-06-20 17:39:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Machining smooth Curves rab@r... 2001-06-21 15:48:11 UTC Re: Machining smooth Curves Alan Marconett KM6VV 2001-06-21 17:35:22 UTC Re: Machining smooth Curves M. SHABBIR MOGHUL 2001-06-21 20:50:57 UTC [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath rab@r... 2001-06-22 02:51:46 UTC Re: Machining smooth Curves Carol & Jerry Jankura 2001-06-22 06:19:44 UTC RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath Rich D. 2001-06-22 07:31:49 UTC Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath M. SHABBIR MOGHUL 2001-06-23 08:39:25 UTC RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath M. SHABBIR MOGHUL 2001-06-23 08:40:35 UTC Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath