CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath

on 2001-06-22 06:19:44 UTC
Shabbir:

DXF files change among different versions of Autocad. It could be that
BobCad does not read AutoCad-14 DXF files. If possible, try having
AutoCAD-14 generate a DXF file in the format of an earlier version of
AutoCAD. If AutoCAD-14 does not offer this ability, get a copy of
Intellicad-2000, which does. Intellicad-2000 is available for FREE from the
following web site: www.cadopia.com.

-- Carol & Jerry Jankura
Strongsville, Ohio
So many toys, so little time



-----Original Message-----
From: M. SHABBIR MOGHUL [mailto:shabm@...]
Sent: Thursday, June 21, 2001 12:57 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath


hi all
shabbir here
i have download demo version of Bobcad 17. it is not loading or opening 3D
drwing in DXF format. I have Acad 14 for drawing.

Discussion Thread

rab@r... 2001-06-19 16:20:10 UTC Machining smooth Curves ballendo@y... 2001-06-20 02:32:30 UTC Re: Machining smooth Curves Tom Eldredge 2001-06-20 12:00:05 UTC Re: [CAD_CAM_EDM_DRO] Machining smooth Curves rab@r... 2001-06-20 16:25:26 UTC Re: Machining smooth Curves Art Fenerty 2001-06-20 17:39:17 UTC Re: [CAD_CAM_EDM_DRO] Re: Machining smooth Curves rab@r... 2001-06-21 15:48:11 UTC Re: Machining smooth Curves Alan Marconett KM6VV 2001-06-21 17:35:22 UTC Re: Machining smooth Curves M. SHABBIR MOGHUL 2001-06-21 20:50:57 UTC [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath rab@r... 2001-06-22 02:51:46 UTC Re: Machining smooth Curves Carol & Jerry Jankura 2001-06-22 06:19:44 UTC RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath Rich D. 2001-06-22 07:31:49 UTC Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath M. SHABBIR MOGHUL 2001-06-23 08:39:25 UTC RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath M. SHABBIR MOGHUL 2001-06-23 08:40:35 UTC Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath