Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath

thanks
its working after exploid but some parts of drawing was discards.

shabbir
ICQ 115198417



******************************At 10:26 AM 6/22/01 -0400, you wrote:

>Shabbir,Jerry,
>Bobcad "reads" R14 DXF's all day long and probly other versions. What
>you must do is to "explode" the drawing before saving to DXF so that
>the object will be _only_ lines and arcs. Polylines and splines will NOT
>appear.
>RichD
>
>Carol & Jerry Jankura wrote:
>>
>> Shabbir:
>>
>> DXF files change among different versions of Autocad. It could be that
>> BobCad does not read AutoCad-14 DXF files. If possible, try having
>> AutoCAD-14 generate a DXF file in the format of an earlier version of
>> AutoCAD. If AutoCAD-14 does not offer this ability, get a copy of
>> Intellicad-2000, which does. Intellicad-2000 is available for FREE from the
>> following web site: www.cadopia.com.
>>
>> -- Carol & Jerry Jankura
>> Strongsville, Ohio
>> So many toys, so little time
>>
>> -----Original Message-----
>> From: M. SHABBIR MOGHUL [mailto:shabm@...]
>> Sent: Thursday, June 21, 2001 12:57 PM
>> To: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subject: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath
>>
>> hi all
>> shabbir here
>> i have download demo version of Bobcad 17. it is not loading or opening 3D
>> drwing in DXF format. I have Acad 14 for drawing.
>>
>> Addresses:
>> FAQ: http://www.ktmarketing.com/faq.html
>> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>>
>> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>> Moderator: jmelson@... timg@... [Moderator]
>> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>> bill,
>> List Manager
>>
>>
>>
>> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>--
>~ ~~ ~ ~ ~~ ~~___~~,~~ ~~~~
> \------/ |00|_[]_[]__||0
> .|_CMRy_|-|__|________|_|,
>__________''oo__oo__---"0=0=0"=o[]o\\______________________________
>-==Rich=-=Colorado Midland Railway=-=cmsteam@...=-Atlanta-
>----------See my web site: <http://cmsteamer.homestead.com/> ------
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>