Re: Machining smooth Curves
Posted by
Alan Marconett KM6VV
on 2001-06-21 17:35:22 UTC
Hi Rab,
Great site! And thanks for the Bezier URL's. I hadn't found your
"MAXScripts" page the other day (saw it TODAY!), but I did see some
great pix on the Taig mill, and the "Celtic Knot" rings! I was thinking
I'd like to cut something like that myself!
MAXScripts seems to be a "plug in" for "3D Studio MAX"? Probably out of
reach for us "hobbyists".
Are you proposing something like adding "circle" and "Bezier curve"
Gcodes be added? And letting the "controller" CUT the best circle or
curve it could (or controlled with a "resolution" parm)? That could be
interesting.
Thanks for posting!
Alan KM6VV
rab@... wrote:
Great site! And thanks for the Bezier URL's. I hadn't found your
"MAXScripts" page the other day (saw it TODAY!), but I did see some
great pix on the Taig mill, and the "Celtic Knot" rings! I was thinking
I'd like to cut something like that myself!
MAXScripts seems to be a "plug in" for "3D Studio MAX"? Probably out of
reach for us "hobbyists".
Are you proposing something like adding "circle" and "Bezier curve"
Gcodes be added? And letting the "controller" CUT the best circle or
curve it could (or controlled with a "resolution" parm)? That could be
interesting.
Thanks for posting!
Alan KM6VV
rab@... wrote:
>
> I havn't found a suitable file format but I've put some new links on
> Bezier Curves that were suggested at the bottom of my webpage:
> http://www.development.rainnea.com/
>
> Rab
Discussion Thread
rab@r...
2001-06-19 16:20:10 UTC
Machining smooth Curves
ballendo@y...
2001-06-20 02:32:30 UTC
Re: Machining smooth Curves
Tom Eldredge
2001-06-20 12:00:05 UTC
Re: [CAD_CAM_EDM_DRO] Machining smooth Curves
rab@r...
2001-06-20 16:25:26 UTC
Re: Machining smooth Curves
Art Fenerty
2001-06-20 17:39:17 UTC
Re: [CAD_CAM_EDM_DRO] Re: Machining smooth Curves
rab@r...
2001-06-21 15:48:11 UTC
Re: Machining smooth Curves
Alan Marconett KM6VV
2001-06-21 17:35:22 UTC
Re: Machining smooth Curves
M. SHABBIR MOGHUL
2001-06-21 20:50:57 UTC
[CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath
rab@r...
2001-06-22 02:51:46 UTC
Re: Machining smooth Curves
Carol & Jerry Jankura
2001-06-22 06:19:44 UTC
RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath
Rich D.
2001-06-22 07:31:49 UTC
Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath
M. SHABBIR MOGHUL
2001-06-23 08:39:25 UTC
RE: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath
M. SHABBIR MOGHUL
2001-06-23 08:40:35 UTC
Re: [CAD_CAM_EDM_DRO] 3D converting into G-Code toolpath