Re: [CAD_CAM_EDM_DRO] Biax scraper/scraping rulers

So Doug don't forget that the arm has to be mounted in rubber,
if you forget that you will break quite a few scraping tips.
The ones from Sandwick are about 29 Bucks at the moment,
so it becomes expensive breaking them.
Good luck
Sven Peter

Doug Harrison wrote:

> Sven;
> The scraper was at a used machine dealer but is now gone. I have decided to
> try building an attachment for a Sawzall reciprocating saw. The stroke is
> about right, the Sawzall is variable speed and well built. Just need to
> build an adapter.
>
> Doug
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

[Non-text portions of this message have been removed]