Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Posted by
hllrsr@c...
on 2001-06-24 16:04:08 UTC
Wally,
Found out about UPS the hard way when I ordered some cogged timing belts
for a belt reduction drive, $25 CAN for the belts, $15 CAN for the
shipping, $45 CAN FOR THE UPS BROKERAGE! Now I let Canadian Bearings
deal with the headache. <gr>
Any ideas out there, on an economical way to build up & true a lathe
bed?
Have a chance at a Colchester Student that has been partially
retro-fitted, but in the 8" closest to the chuck it tapers .037" due to
wear.
I can send it out to be ground and get the gibs built up, but the whole
project is a self imposed challenge to see how low cost I can go.
BTW, the lathe is likely to cost ~$500 CAN with an old Fanuc controller
boxed and included.
Iain
Oro Station, Ont.
(approx. 60 min. N. of Toronto)
Found out about UPS the hard way when I ordered some cogged timing belts
for a belt reduction drive, $25 CAN for the belts, $15 CAN for the
shipping, $45 CAN FOR THE UPS BROKERAGE! Now I let Canadian Bearings
deal with the headache. <gr>
Any ideas out there, on an economical way to build up & true a lathe
bed?
Have a chance at a Colchester Student that has been partially
retro-fitted, but in the 8" closest to the chuck it tapers .037" due to
wear.
I can send it out to be ground and get the gibs built up, but the whole
project is a self imposed challenge to see how low cost I can go.
BTW, the lathe is likely to cost ~$500 CAN with an old Fanuc controller
boxed and included.
Iain
Oro Station, Ont.
(approx. 60 min. N. of Toronto)
> --Snip--
>
> I prefer USPS also for most of the things I buy from the US, which are
> mostly old books on Numerical Control. I wonder
> how many other Canucks are on the list ?
>
> -Wally
>
Discussion Thread
cadcamcenter@y...
2001-06-19 05:13:02 UTC
Cadcam, CNC & eCommerce
cncdxf@a...
2001-06-19 15:10:59 UTC
Re: Cadcam, CNC & eCommerce
Tim Goldstein
2001-06-19 15:56:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Jon Elson
2001-06-19 17:38:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Henry H. Armstrong
2001-06-19 20:24:17 UTC
Re: [CAD_CAM_EDM_DRO] Cadcam, CNC & eCommerce
cadcamcenter@y...
2001-06-19 21:10:02 UTC
Cadcam, CNC & eCommerce
Jon Anderson
2001-06-19 22:14:36 UTC
Re: [CAD_CAM_EDM_DRO] Cadcam, CNC & eCommerce
wanliker@a...
2001-06-19 22:44:48 UTC
Re: [CAD_CAM_EDM_DRO] Cadcam, CNC & eCommerce
cadcamcenter@y...
2001-06-20 02:32:41 UTC
Re: Cadcam, CNC & eCommerce
Jon Elson
2001-06-20 09:59:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Al Schoepp
2001-06-20 11:14:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
cadcamcenter@y...
2001-06-20 11:35:43 UTC
Re: Cadcam, CNC & eCommerce
brian
2001-06-20 15:11:09 UTC
Re: [CAD_CAM_EDM_DRO] Cadcam, CNC & eCommerce
Wally Daniels
2001-06-20 18:57:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Peter Chen
2001-06-20 21:21:25 UTC
Cadcam, CNC & eCommerce
Al Schoepp
2001-06-22 06:16:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Ward M.
2001-06-24 00:21:28 UTC
RE: [CAD_CAM_EDM_DRO] Cadcam, CNC & eCommerce
Wally Daniels
2001-06-24 15:42:37 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
hllrsr@c...
2001-06-24 16:04:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
Sven Peter, TAD S.A.
2001-06-24 17:01:57 UTC
Re: [CAD_CAM_EDM_DRO] Re: Cadcam, CNC & eCommerce
ballendo@y...
2001-06-26 05:01:38 UTC
Re: Cadcam, CNC & eCommerce
Al Schoepp
2001-06-26 07:27:28 UTC
Re: [CAD_CAM_EDM_DRO] books
wdaniels@g...
2001-06-26 08:30:47 UTC
Re: [CAD_CAM_EDM_DRO] books
Al Schoepp
2001-06-27 06:55:50 UTC
Re: [CAD_CAM_EDM_DRO] books
Sven Peter, TAD S.A.
2001-06-27 21:53:35 UTC
Re: [CAD_CAM_EDM_DRO] books
Hugh & Denise Currin
2001-07-03 11:40:46 UTC
Axis Re-set ?
Tim Goldstein
2001-07-03 11:57:44 UTC
RE: [CAD_CAM_EDM_DRO] Axis Re-set ?
Ian Wright
2001-07-03 14:31:14 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
Jon Elson
2001-07-03 22:24:11 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
Jon Elson
2001-07-03 22:30:04 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
Ian Wright
2001-07-04 02:03:56 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
Ian Wright
2001-07-04 12:38:59 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
Jon Elson
2001-07-04 15:59:13 UTC
Re: [CAD_CAM_EDM_DRO] Axis Re-set ?
mkcchrn
2007-11-24 10:21:36 UTC
books