RE: [CAD_CAM_EDM_DRO] EMC installation problems
Posted by
Tim Goldstein
on 2001-06-27 09:19:24 UTC
First suggestion is go to http://www.linuxcnc.org/bdi/ and contact the
proper person to get a BDI EMC disk. It will have you up and running in no
time. If you want to do it the old way than it would be easiest to do it on
RedHat 5.2 and use the script that is at http://206.19.206.56/installemc.htm
Tim
[Denver, CO]
proper person to get a BDI EMC disk. It will have you up and running in no
time. If you want to do it the old way than it would be easiest to do it on
RedHat 5.2 and use the script that is at http://206.19.206.56/installemc.htm
Tim
[Denver, CO]
> -----Original Message-------Snip---
> Hi,
>
> At the moment I am trying to get EMC running on RedHat 7.0 with a
> linux-2.2.18 kernel and rtlinux-3.0. This is my first attempt
> at installing
> EMC, here's what I have done.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Discussion Thread
David Micklethwaite
2001-06-27 00:29:11 UTC
EMC installation problems
Tim Goldstein
2001-06-27 09:19:24 UTC
RE: [CAD_CAM_EDM_DRO] EMC installation problems
Kenn Danner
2001-06-27 09:38:33 UTC
Re: [CAD_CAM_EDM_DRO] EMC installation problems
Luciano Cardoso
2001-06-27 09:45:00 UTC
Re: [CAD_CAM_EDM_DRO] EMC installation problems
Paul
2001-06-27 12:31:26 UTC
RE: [CAD_CAM_EDM_DRO] EMC installation problems
M. SHABBIR MOGHUL
2001-06-28 19:51:23 UTC
Help required stepper is to slow?