Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
Posted by
David M. Munro
on 2001-07-05 16:15:28 UTC
Tom Eldredge wrote:
HORIZONTAL mill. These are not fashonable for the home shop machinist, but for
shear raw metal removal, and the availablity of affordable used tooling there
is nothing like a big horizontal mill. They are cheap too, and tend to have
reliable spindle motor driven power feeds. I second the idea that using one
for CNC is not really practical. One rarely sees CNC horizontal mills of any
description.
David M. Munro
> This is good advice from John. I believe it is a re-post of a previous postNot mentioned so far is that the A&S mill marketed by Bridgeport is a
> is it not? Anyhow it is good, and ought to be repeated from time to time.
>
> Tom Eldredge
>
> \> --- In CAD_CAM_EDM_DRO@y..., u980162@y... wrote:
> > > I have a Bridgeport Milling machine of Adcock - Shipley. I am
> > > planning to convert into CNC
>
> John said:
> > If this is the standard manual machine then don't convert it. It's
> > not a viable proposition.
> > At the moment you have a manual mill worth around 2 to $3000 at a
> > guess. ...
> > Sorry to be a wet blanket but it's all down to cost.
> >
> > John Stevenson.
HORIZONTAL mill. These are not fashonable for the home shop machinist, but for
shear raw metal removal, and the availablity of affordable used tooling there
is nothing like a big horizontal mill. They are cheap too, and tend to have
reliable spindle motor driven power feeds. I second the idea that using one
for CNC is not really practical. One rarely sees CNC horizontal mills of any
description.
David M. Munro
Discussion Thread
u980162@y...
2001-07-04 01:18:25 UTC
Bridgeport Mill by Adcock and Shipley
machines@n...
2001-07-04 14:32:06 UTC
Re: Bridgeport Mill by Adcock and Shipley
Paul
2001-07-04 14:51:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
Gabriel L Romeu
2001-07-04 15:58:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
Tom Eldredge
2001-07-05 07:31:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
David M. Munro
2001-07-05 16:15:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
Fitch R. Williams
2001-07-05 16:32:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
machines@n...
2001-07-05 17:35:58 UTC
Re: Bridgeport Mill by Adcock and Shipley
Jon Elson
2001-07-05 20:55:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley
hllrsr@c...
2001-07-07 02:49:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Bridgeport Mill by Adcock and Shipley