Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Posted by
Sven Peter, TAD S.A.
on 2001-07-17 20:37:06 UTC
lew best wrote:
notes. Sometimes you find even a test certificate.
And you are right, in only very few occasions at Bridgeport mills the date is
marked in the type plate.
More often you find an inventory number than a mfr date then ask the accountant.
On other brands you find more frequent the date on the type plate.
In the electric panel you may find hints for the date on the components
or a wiring sketch with a date.
Sven Peter
[Non-text portions of this message have been removed]
> HiAsking his owner and looking into the manuals looking for manuscript
>
> Just curious; how do you estimate the age of a Bridgeport with reasonable
> accuracy?
>
> Lew
notes. Sometimes you find even a test certificate.
And you are right, in only very few occasions at Bridgeport mills the date is
marked in the type plate.
More often you find an inventory number than a mfr date then ask the accountant.
On other brands you find more frequent the date on the type plate.
In the electric panel you may find hints for the date on the components
or a wiring sketch with a date.
Sven Peter
[Non-text portions of this message have been removed]
Discussion Thread
Sven Peter, TAD S.A.
2001-07-15 18:55:06 UTC
scraping beds for long tables
Marcus & Eva
2001-07-15 20:33:35 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Jon Elson
2001-07-15 23:08:22 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Sven Peter, TAD S.A.
2001-07-16 06:30:30 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Jon Elson
2001-07-16 10:36:03 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Doug Harrison
2001-07-16 13:55:20 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Smoke
2001-07-16 15:16:53 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Sven Peter, TAD S.A.
2001-07-16 20:06:39 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Sven Peter, TAD S.A.
2001-07-16 20:07:12 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
lew best
2001-07-16 20:13:17 UTC
RE: [CAD_CAM_EDM_DRO] scraping beds for long tables
Jon Elson
2001-07-16 21:58:15 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Jon Elson
2001-07-16 22:34:46 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Sven Peter, TAD S.A.
2001-07-17 19:11:19 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Sven Peter, TAD S.A.
2001-07-17 20:37:06 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
Jon Elson
2001-07-17 22:55:58 UTC
Re: [CAD_CAM_EDM_DRO] scraping beds for long tables
machines@n...
2001-07-18 00:49:41 UTC
Bridgeport serial numbers Was: scraping beds for long tables
lew best
2001-07-18 04:38:27 UTC
RE: [CAD_CAM_EDM_DRO] Bridgeport serial numbers Was: scraping beds for long tables