CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] scraping beds for long tables

Posted by Jon Elson
on 2001-07-17 22:55:58 UTC
> lew best wrote:
>
> > Hi
> >
> > Just curious; how do you estimate the age of a Bridgeport with reasonable
> > accuracy?
> >

On Bridgeport machines, there is generally a serial number on the head and
knee. The heads are often swapped on older machines that have been rebuilt.
The knee serial number is usually on the top of the knee, between the Y axis
ways, when the sliding chip guard is pushed back. The numbers are sequential,
so if you have a point of reference, you can easily guess it within 5 years.

Jon

Discussion Thread

Sven Peter, TAD S.A. 2001-07-15 18:55:06 UTC scraping beds for long tables Marcus & Eva 2001-07-15 20:33:35 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Jon Elson 2001-07-15 23:08:22 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Sven Peter, TAD S.A. 2001-07-16 06:30:30 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Jon Elson 2001-07-16 10:36:03 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Doug Harrison 2001-07-16 13:55:20 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Smoke 2001-07-16 15:16:53 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Sven Peter, TAD S.A. 2001-07-16 20:06:39 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Sven Peter, TAD S.A. 2001-07-16 20:07:12 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables lew best 2001-07-16 20:13:17 UTC RE: [CAD_CAM_EDM_DRO] scraping beds for long tables Jon Elson 2001-07-16 21:58:15 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Jon Elson 2001-07-16 22:34:46 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Sven Peter, TAD S.A. 2001-07-17 19:11:19 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Sven Peter, TAD S.A. 2001-07-17 20:37:06 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables Jon Elson 2001-07-17 22:55:58 UTC Re: [CAD_CAM_EDM_DRO] scraping beds for long tables machines@n... 2001-07-18 00:49:41 UTC Bridgeport serial numbers Was: scraping beds for long tables lew best 2001-07-18 04:38:27 UTC RE: [CAD_CAM_EDM_DRO] Bridgeport serial numbers Was: scraping beds for long tables