Re: [CAD_CAM_EDM_DRO] Re: Leadscrews, PCB router experiment

Hi, his web site is www.tinkers-emporium.com and you will find him very
pleasant to work with. he has a bunch of different offers for drills. cul
brian f.

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, July 24, 2001 4:59 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Leadscrews, PCB router experiment


> Hi Bill,
>
> Thanks! That's cheap enough!
>
> Alan KM6VV
>
> William Scalione wrote:
> >
> > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1619357457
> >
> > Here is a link to an ebay item for some of these drill bits. I bought
> > some a while back (1/6") and actually used them for router bits for
> > doing inlay on my cnc router. I have also cut thin stainless steel with
> > them, and use them to drill pilot holes. If you email this guy he will
> > probably sell you whatever size you need without going through
> > ebay.
> >
> > usual disclaimer- I don't know this guy, just a customer
> >
> > Bill
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>