Re: Leadscrews, PCB router experiment

Hi Bill,

Yeah, they ARE cheap! And cheap shipping too. I've got some on order,
and visited his site.

Thanks again for the lead!

Alan KM6VV


William Scalione wrote:

>
> Alan
>
> Yes, In fact with all this talk I remembered I needed more so I
> just got 50 of the 1/16" and 50 of the 3/32" bits from him total
> cost was $11.00 plus $2.00 shipping for 100 bits. Printed
> circuit board holes may need to be smaller than that though.
> Email him and ask for smaller ones.
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1619345098
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1619343244
>
> Bill
>
> > Hi Bill,
> >
> > Thanks! That's cheap enough!
> >
> > Alan KM6VV
> >
> > William Scalione wrote:
> > >
> > > http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1619357457
> > >
> > > Here is a link to an ebay item for some of these drill bits. I bought
> > > some a while back (1/6") and actually used them for router bits for
> > > doing inlay on my cnc router. I have also cut thin stainless steel with
> > > them, and use them to drill pilot holes. If you email this guy he will
> > > probably sell you whatever size you need without going through
> > > ebay.
> > >
> > > usual disclaimer- I don't know this guy, just a customer
> > >
> > > Bill
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/