RE: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
Posted by
Scott M. Thomas
on 2001-08-13 07:12:11 UTC
William,
How did you keep the table from skewing?
-----Original Message-----
From: William Scalione [mailto:wscalione@...]
Sent: Saturday, August 11, 2001 5:39 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
Rab,
If you are building a small router I would suggest making
a moving table for the X axis and have the Y and Z axis on
the bridge. Makes it much simpler as there are no "skewing"
problems with the gantry and having to drive it from both ends.
I built mine out of 80/20 aluminum extrusion and for a router
it works great. I used THK rails, servo motors, Gecko G340
drives and ballscrews.
linear slides or extrusion :(
bill
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
How did you keep the table from skewing?
-----Original Message-----
From: William Scalione [mailto:wscalione@...]
Sent: Saturday, August 11, 2001 5:39 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
Rab,
If you are building a small router I would suggest making
a moving table for the X axis and have the Y and Z axis on
the bridge. Makes it much simpler as there are no "skewing"
problems with the gantry and having to drive it from both ends.
I built mine out of 80/20 aluminum extrusion and for a router
it works great. I used THK rails, servo motors, Gecko G340
drives and ballscrews.
>low-cost aluminium extrusions, linear slides, etc?I'm not sure that there is any such thing as low cost
linear slides or extrusion :(
bill
> Hi all,Addresses:
>
> I'm looking at the feasibility of building a small low-cost 5-axis
> CNC wood router for the batch production of decorative knife handles,
> etc. and would appreciate any advice on the pros and cons of the
> different design approaches commonly used in CNC routers.
> My first thoughts are to use bolt together aluminium extrusions with
> linear slides, leadscrews and servos, but have a lot of questions.
> In gantry style systems where the gantry is driven from both sides,
> what's the best way of synchronising both the leadscrews in case the
> gantry skews ?
> Does a rack and pinion have any advantages over a leadscrew ?
> Is it worth looking at linear motors ?
> Given that each part would need use of a roughing and a finishing
> (fine detail) tool, I'm looking at ways of mounting two router heads
> to save tool-changing, has anyone tried this ?
> Does anyone in the UK know of suppliers of low-cost aluminium
> extrusions, linear slides, etc?
> Any other thoughts on what I've overlooked ?
>
> Rab,
> Rainnea Graphics
> http://www.project.rainnea.com
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
rab@r...
2001-08-11 09:38:44 UTC
DIY Router Design questions ?
Art Fenerty
2001-08-11 12:51:48 UTC
Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
cadcamcenter@y...
2001-08-11 13:36:13 UTC
Re: DIY Router Design questions ?
William Scalione
2001-08-11 13:36:46 UTC
Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
Art Fenerty
2001-08-11 14:36:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
Doug Harrison
2001-08-11 18:18:50 UTC
Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
Smoke
2001-08-12 06:37:03 UTC
Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
rab@r...
2001-08-12 07:11:08 UTC
Re: DIY Router Design questions ?
Art Fenerty
2001-08-12 07:32:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
deanc500@y...
2001-08-12 07:51:33 UTC
Re: DIY Router Design questions ?
rab@r...
2001-08-12 08:34:57 UTC
Re: DIY Router Design questions ?
rab@r...
2001-08-12 08:37:13 UTC
Re: DIY Router Design questions ?
Art Fenerty
2001-08-12 08:42:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
Art Fenerty
2001-08-12 08:45:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
deanc500@y...
2001-08-12 09:37:58 UTC
Re: DIY Router Design questions ?
Art Fenerty
2001-08-12 10:28:02 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
wanliker@a...
2001-08-12 11:02:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
Art Fenerty
2001-08-12 11:16:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
deanc500@y...
2001-08-12 11:23:31 UTC
Re: DIY Router Design questions ?
wanliker@a...
2001-08-12 11:43:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
Smoke
2001-08-12 14:06:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: DIY Router Design questions ?
Scott M. Thomas
2001-08-13 07:12:11 UTC
RE: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
William Scalione
2001-08-13 13:36:16 UTC
Re: [CAD_CAM_EDM_DRO] DIY Router Design questions ?
rab@r...
2001-08-15 16:36:17 UTC
Wire Rope v Timing Belt, was DIY Router Design questions ?