RE: [CAD_CAM_EDM_DRO] Re: Current and the L298 & IRF530/IRF540

You can buy them at Active Electronics in many cities or you can mail
order them from Mouser Electronics.
Dan

-----Original Message-----
From: Ross Overstreet [mailto:ross-o@...]
Sent: Sunday, August 19, 2001 1:05 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: RE: [CAD_CAM_EDM_DRO] Re: Current and the L298 & IRF530/IRF540

Hi Guys,
I'm having a hard time finding a source for L297's.
Where do you guys buy these things?

Dave - thanks for asking this one! I'm in the same
boat and was searching the web for homebrew ~10A
stepper driver circuits!

Cheers,
Ross-O
http://users.better.org/roverstreet/

-----Original Message-----
From: daque@... [mailto:daque@...]
Sent: Sunday, August 19, 2001 9:41 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: Current and the L298 & IRF530/IRF540


Thanks for the replies. Seems simple enough. I once used IRF530's in
a 36vdc h bridege motor circuit. They were held to the heatsinks with
plastic push rivets. You could find the blown one easy. It would melt
the push rivet, the solder around its legs, and then slide down about
a quarter inch.

One thing for people new to MOSFETS, use a high enough voltage rated
part. Inductive pulses were killing those 100v fets protected by a
68v znr. The problem was the peak clamping volatage of the znr was
over 100v by a little. Live and learn. IRF540's were rock solid.

Dave


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/