CAD CAM EDM DRO - Yahoo Group Archive

Re: Low cost limit switch suggestions

Posted by ballendo@y...
on 2001-09-04 17:21:56 UTC
Hello,

William gives good advice here as to WHERE to find inexpensive
switches.

Be sure to understand that a "limit" switch is NOT the same thing as
a "home" switch; when speaking to "switch people". The main
difference is that a limit switch must be infinitely RELIABLE as to
TRIPPING WHEN ACTIVATED, but NOT necessarily AT THE SAME POINT OF
TRAVEL...

A home switch must have "tighter" specifications as to TRIP POINT and
HYSTERESIS...

Hope this helps.

Ballendo

--- In CAD_CAM_EDM_DRO@y..., "William Scalione" <wscalione@n...>
wrote:
>
> >
> >
> > Brian Pitt wrote:
> >
> > > if you have any extra travel outside the original limit
switches (~1/8")
> >
> > I can adjust the original limits for less travel
> >
> > >
> > > you could add cheaper less accurate 'overtravel' switches to
kill the
> > > power to the drives 'just in case'
> >
> > What might be "cheaper less accurate 'overtravel' switches"
>
> Go to ebay and do a search for "limit switch" there are lots of
> good quality switches for $10.00
>
>
> Bill

Discussion Thread

Robert Allen & Marsha Camp 2001-09-04 07:18:41 UTC Low cost limit switch suggestions vrsculptor@h... 2001-09-04 08:53:26 UTC Re: Low cost limit switch suggestions Jon Elson 2001-09-04 10:40:23 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions Brian Pitt 2001-09-04 11:07:35 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions Robert Allen & Marsha Camp 2001-09-04 15:40:00 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions Robert Allen & Marsha Camp 2001-09-04 15:44:32 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions William Scalione 2001-09-04 16:42:21 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions William Scalione 2001-09-04 16:47:50 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions ballendo@y... 2001-09-04 17:16:54 UTC Re: Low cost limit switch suggestions bfp@e... 2001-09-04 17:20:45 UTC Re: Low cost limit switch suggestions ballendo@y... 2001-09-04 17:21:56 UTC Re: Low cost limit switch suggestions Jon Elson 2001-09-04 21:24:37 UTC Re: [CAD_CAM_EDM_DRO] Low cost limit switch suggestions