CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC installation instructions...

Posted by Ian Wright
on 1999-10-06 09:46:19 UTC
Hi Clint,

Have a look at the Hardinge Lathes site (can't remember their URL but the
search engines find it) - they have a lot of info on R8 collets.

Ian
--
Ian W. Wright
Sheffield UK


----- Original Message -----
> From: Clint Bach <clintbach@...>
> On another related but different area... I plan to have my cnc cut its
> own spindle for R-8 collets. I already cut the outside of the spindle
> nose but I don't know the dimensions of a "standard" R-8 collet. One of
> the ones I measured has a 0.949 inch diameter on the top straight end
> but what angle is the cone shaped part supposed to be? My guess is it
> could be either an angle in degrees or a certain number of inches per
> foot taper or something entirely different. Does anyone have that
> information or know where I can get it?

Discussion Thread

Clint Bach 1999-10-05 20:36:49 UTC EMC installation instructions... drew@x... 1999-10-06 07:43:55 UTC Re: EMC installation instructions... Ray Henry 1999-10-06 08:29:04 UTC EMC installation instructions... Tim Goldstein 1999-10-06 08:51:34 UTC Re: EMC installation instructions... Jon Elson 1999-10-06 12:42:37 UTC Re: EMC installation instructions... Ian Wright 1999-10-06 09:46:19 UTC Re: EMC installation instructions... Fred Proctor 1999-10-07 08:49:24 UTC Re: EMC installation instructions...