CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC installation instructions...

Posted by drew@x...
on 1999-10-06 07:43:55 UTC
Clint,

Here's a the URL for the specs of an R-8 collet

http://www.loganact.com/tips/r8.htm

Not sure of the accuracy though.

Drew

On Oct 5, 11:36pm, Clint Bach wrote:
> Subject: [CAD_CAM_EDM_DRO] EMC installation instructions...
> From: Clint Bach <clintbach@...>
>
> Hi,
>
[snip]
>
> On another related but different area... I plan to have my cnc cut its
> own spindle for R-8 collets. I already cut the outside of the spindle
> nose but I don't know the dimensions of a "standard" R-8 collet. One of
> the ones I measured has a 0.949 inch diameter on the top straight end
> but what angle is the cone shaped part supposed to be? My guess is it
> could be either an angle in degrees or a certain number of inches per
> foot taper or something entirely different. Does anyone have that
> information or know where I can get it?
>
> I'm getting closer to having my system up and running... Well, actually
> it IS up and running with an AHHA control system but I want my second
> machine to be controlled with EMC.
>
> Thanks,
>
> Clint Bach
>
[snip]
>-- End of excerpt from Clint Bach



--
Drew Rogge
drew@...

Discussion Thread

Clint Bach 1999-10-05 20:36:49 UTC EMC installation instructions... drew@x... 1999-10-06 07:43:55 UTC Re: EMC installation instructions... Ray Henry 1999-10-06 08:29:04 UTC EMC installation instructions... Tim Goldstein 1999-10-06 08:51:34 UTC Re: EMC installation instructions... Jon Elson 1999-10-06 12:42:37 UTC Re: EMC installation instructions... Ian Wright 1999-10-06 09:46:19 UTC Re: EMC installation instructions... Fred Proctor 1999-10-07 08:49:24 UTC Re: EMC installation instructions...