Re: [CAD_CAM_EDM_DRO] Writing programs, volunteers needed for information

Only one thats available is a 3D image I created using Rhino posted at the
egroups DreamMachine site. There are also some files there which describe
the machine and it's possible variations as well as some layout drawings
indicating sizes.

You can check them all out at http://groups.yahoo.com/group/DreamMachine

Smoke

> Do you have any pictures of the machine?
>
> John H.
>
>
> > Never heard of that golden rule. The design works be done for quite
> some
> > time. Build time will probably take about ten times the design time!
> >
> > I started building the first one some time ago but its delayed at

present

> > due to a supplier being extremely slow to deliver the materials I've had
> on
> > order for over a month.
> >
> > Smoke
> >
> > > How's this dream machine coming along I've heard about? Is it still in
> the
> > > design phase? Remember the golden rule, take the expected build time

and

> > > multiply by 10. You should really top all it's counter parts and add

an

> > egg
> > > frier! `.^)
> > >
> > > John He.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>