Re: [CAD_CAM_EDM_DRO] 3D digitizer table
Posted by
Iain Ward
on 2001-09-29 22:52:11 UTC
Guys,
Have spent a good piece of time digging in the archives, and am
wondering if a consensus was ever reached on a good home-brew probe?
In the bigger view, $1000.00 is not overly excessive, but as a hobbyist
user, it is definitely out of the budget. (Or so the wife says!<vbg>)
Iain
Doug Fortune wrote:
Have spent a good piece of time digging in the archives, and am
wondering if a consensus was ever reached on a good home-brew probe?
In the bigger view, $1000.00 is not overly excessive, but as a hobbyist
user, it is definitely out of the budget. (Or so the wife says!<vbg>)
Iain
Doug Fortune wrote:
>-snip-
> Colin <cdoughty@...> wrote:
>
> > Has any one got plains to build a 3D digitizer table.
> > any ideas please.
>
> Hi Colin:
>
> Homebrew type probes have been discussed here (CCED forum)
> early this spring, but I doubt whether any of those designs
> are in the above performance catagory.... (and obviously
> they don't have to be for many hobby purposes).
>
> Doug Fortune
> http://www.cncKITS.com
>
Discussion Thread
Doug Fortune
2001-09-29 19:04:50 UTC
3D digitizer table
Iain Ward
2001-09-29 22:52:11 UTC
Re: [CAD_CAM_EDM_DRO] 3D digitizer table
Alan Marconett KM6VV
2001-09-30 12:25:42 UTC
Re: [CAD_CAM_EDM_DRO] 3D digitizer table
shymu@b...
2001-09-30 18:32:15 UTC
Re: 3D digitizer table
Alan Marconett KM6VV
2001-10-01 11:06:49 UTC
Re: 3D digitizer table