Re: 3D digitizer table

Shymu,

Check back with MaxNC. They just shipped me a step/dir version of
PROBE.

Alan KM6VV


shymu@... wrote:

>
> I bought a probe, and software from MaxNc but the software was for
> unipolar not step and direction. Wish I could find the right software.
>
> --- In CAD_CAM_EDM_DRO@y..., Iain Ward <hllrsr@c...> wrote:
> > Guys,
> > Have spent a good piece of time digging in the archives, and am
> > wondering if a consensus was ever reached on a good home-brew probe?
> >
> > In the bigger view, $1000.00 is not overly excessive, but as a
> hobbyist
> > user, it is definitely out of the budget. (Or so the wife
> says!<vbg>)
> >
> > Iain
> >
> >
> > Doug Fortune wrote:
> > >
> > > Colin <cdoughty@p...> wrote:
> > >
> > > > Has any one got plains to build a 3D digitizer table.
> > > > any ideas please.
> > >
> > > Hi Colin:
> > >
> > -snip-
> >
> > > Homebrew type probes have been discussed here (CCED forum)
> > > early this spring, but I doubt whether any of those designs
> > > are in the above performance catagory.... (and obviously
> > > they don't have to be for many hobby purposes).
> > >
> > > Doug Fortune
> > > http://www.cncKITS.com
> > >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/