Re: [CAD_CAM_EDM_DRO] Circuits needed

Hi bill
it is difficult job but i will solve it. it takes some time. please wait.

shabbir

At 03:47 PM 10/2/01 +0000, you wrote:

>Can anyone point me to a circuit which will take step and direction
>and convert it to clock up and clock down for a stepper drive which
>has 2 clock inputs instead of a step and dir input. I know its out
>there, but I cant find it.
>
>The second circuit is a little more difficult, has anyone seen a
>circuit that can take the stepper phase outputs from a processor and
>convert it to step and direction.
>
>
>Thanks in advance
>
>Bill Griffin
>
>bill at grifftek dot com
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>