CAD CAM EDM DRO - Yahoo Group Archive

Re: Slo-syn Steppers

Posted by cncdxf@a...
on 2001-10-12 18:12:08 UTC
Brian,
If you took the rotor out of any of those steppers, throw
them away! Adding extra conections is one thing, but doing a
rewind is an other. Stepping motors are magnetized after they
are assembled. The second you pull the rotor out of the field
without a keeper the motor becomes landfill!

Bob




--- In CAD_CAM_EDM_DRO@y..., "brian" <ka1bbg1@m...> wrote:
> Hi Gang, now it is time for me to ask a couple questions. I have
several slo-syn motors that i will reconnect from 3 wire to 8 wire,
also i have some sigma steppers that are 3 wire i will also make them
8 wire. Now how can i calculate the amps per phase? or volts/amps per
phase. The other question, so i take one of these 3 wire steppers and
rewind the coils with heavier wire and connect them for 8 wire how do
i determine volts/amps per phase. I know the transformer routine and
math but it doesnt apply here. thanks cul brian f.
>
>
> [Non-text portions of this message have been removed]

Discussion Thread

brian 2001-10-12 17:44:50 UTC Slo-syn Steppers cncdxf@a... 2001-10-12 18:12:08 UTC Re: Slo-syn Steppers ccs@m... 2001-10-12 18:15:30 UTC Re: [CAD_CAM_EDM_DRO] Slo-syn Steppers art 2001-10-12 19:08:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Slo-syn Steppers brian 2001-10-13 19:08:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Slo-syn Steppers brian 2001-10-13 19:13:46 UTC Re: [CAD_CAM_EDM_DRO] Slo-syn Steppers brian 2001-10-13 19:25:53 UTC Re: [CAD_CAM_EDM_DRO] Re: Slo-syn Steppers