CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit

Posted by Drew Rogge
on 2001-10-23 11:40:38 UTC
Hi Roger,

How did you handle adding a leadscrew to the Z? Any pictures?

Thanks,
Drew

vrsculptor@... wrote:
> Scott,
> I did a servo mini-mill conversion prior to converting my large Tree
> mill. I set up the mini-mill with 22 inch pound geared servo motors
> with encoders on the x,y and Z axis. I used this as a test bed with
> JRKerr drivers and Gecko 340's to test concepts before tackling the
> big machine.
>
> I have since abandonded this machine. If you have any interest I
> would be willing to sell you the motors, mounts, Z leadscrew and
> limit switches and mounts (or the whole machine). I also have a set
> of JRKerr step direction servo drivers available. I used the Gecko's
> on my big mill. The JRKerrs worked but were a bit more comlex than
> the Gecko's.
>
> Let me know off list if you are interested and I will post some yahoo
> pictures.
>
> Roger

--
Drew Rogge
drew@...

Discussion Thread

S.L.Ramsay 2001-10-22 08:45:28 UTC Grizzly G8689 mini-mill CNC retrofit kit dpolan@c... 2001-10-22 17:24:46 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit S.L.Ramsay 2001-10-23 09:45:10 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit Tim 2001-10-23 10:53:27 UTC RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit vrsculptor@h... 2001-10-23 11:30:07 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit Drew Rogge 2001-10-23 11:40:38 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit FIK 2001-10-23 11:41:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit S.L.Ramsay 2001-10-23 11:58:00 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit Tim 2001-10-23 12:09:30 UTC RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit vrsculptor@h... 2001-10-23 12:12:54 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit S.L.Ramsay 2001-10-23 12:15:41 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit tarmacm30@a... 2001-10-23 12:52:56 UTC Re: [CAD_CAM_EDM_DRO] Grizzly G8689 mini-mill CNC retrofit kit wanliker@a... 2001-10-23 13:22:48 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit ccs@m... 2001-10-23 13:47:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit vrsculptor@h... 2001-10-23 14:10:07 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit Ian Wright 2001-10-23 14:34:59 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit S.L.Ramsay 2001-10-23 15:22:27 UTC Re: [CAD_CAM_EDM_DRO] Grizzly G8689 mini-mill CNC retrofit kit johnhe 2001-10-23 15:58:24 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit ccs@m... 2001-10-23 16:04:16 UTC Re: Grizzly G8689 mini-mill CNC retrofit kit vrsculptor@h... 2001-10-23 16:57:02 UTC OT CNC Termites? Was Grizzly G8689 mini-mill CNC retrofit kit HighTech 2001-10-23 19:07:28 UTC RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit Jon Elson 2001-10-23 23:05:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit johnhe 2001-10-24 04:21:47 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit Carol & Jerry Jankura 2001-10-26 16:27:23 UTC RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit