OT CNC Termites? Was Grizzly G8689 mini-mill CNC retrofit kit
Posted by
vrsculptor@h...
on 2001-10-23 16:57:02 UTC
John,
You often see Tree mills being towed behind nursury trucks. You put a
tree in one end and sawdust and chips come out the other. This
process proved too complex for some of the tree mill clients so they
produced a short run of automted tree mills that were capable of
devouring a Tree on the hoof. These machines required very accurate
controls and feeds and were implemented using ball screws and servos.
Unfortunately by the time the machine was finished it was too heavy
for road usage. Pictures available at:
http://photos.yahoo.com/bc/vrsculptor
If you are asked for a password supply your Yahoo ID and password.
Roger
<johnhe@s...> wrote:
You often see Tree mills being towed behind nursury trucks. You put a
tree in one end and sawdust and chips come out the other. This
process proved too complex for some of the tree mill clients so they
produced a short run of automted tree mills that were capable of
devouring a Tree on the hoof. These machines required very accurate
controls and feeds and were implemented using ball screws and servos.
Unfortunately by the time the machine was finished it was too heavy
for road usage. Pictures available at:
http://photos.yahoo.com/bc/vrsculptor
If you are asked for a password supply your Yahoo ID and password.
Roger
<johnhe@s...> wrote:
> > belt play doesn't matter. My Tree mill has almost no detectableforests.
> > backlash but it cost about $40,000 in 1985 and weighs in at 6,000
> > lbs :). Not a fair comparison to a Grizzley.
>
> What is a tree mill exactly? And no you can't mention saw blades or
> : )
>
> John H.
Discussion Thread
S.L.Ramsay
2001-10-22 08:45:28 UTC
Grizzly G8689 mini-mill CNC retrofit kit
dpolan@c...
2001-10-22 17:24:46 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
S.L.Ramsay
2001-10-23 09:45:10 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
Tim
2001-10-23 10:53:27 UTC
RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
vrsculptor@h...
2001-10-23 11:30:07 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
Drew Rogge
2001-10-23 11:40:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
FIK
2001-10-23 11:41:58 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
S.L.Ramsay
2001-10-23 11:58:00 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
Tim
2001-10-23 12:09:30 UTC
RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
vrsculptor@h...
2001-10-23 12:12:54 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
S.L.Ramsay
2001-10-23 12:15:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
tarmacm30@a...
2001-10-23 12:52:56 UTC
Re: [CAD_CAM_EDM_DRO] Grizzly G8689 mini-mill CNC retrofit kit
wanliker@a...
2001-10-23 13:22:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
ccs@m...
2001-10-23 13:47:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
vrsculptor@h...
2001-10-23 14:10:07 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
Ian Wright
2001-10-23 14:34:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
S.L.Ramsay
2001-10-23 15:22:27 UTC
Re: [CAD_CAM_EDM_DRO] Grizzly G8689 mini-mill CNC retrofit kit
johnhe
2001-10-23 15:58:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
ccs@m...
2001-10-23 16:04:16 UTC
Re: Grizzly G8689 mini-mill CNC retrofit kit
vrsculptor@h...
2001-10-23 16:57:02 UTC
OT CNC Termites? Was Grizzly G8689 mini-mill CNC retrofit kit
HighTech
2001-10-23 19:07:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
Jon Elson
2001-10-23 23:05:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
johnhe
2001-10-24 04:21:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit
Carol & Jerry Jankura
2001-10-26 16:27:23 UTC
RE: [CAD_CAM_EDM_DRO] Re: Grizzly G8689 mini-mill CNC retrofit kit