RE: [CAD_CAM_EDM_DRO] Quad encoder to single ?

Probably the least expensive way to go is to get the G901 board to turn the
drive into a G340. Then you can set to move 1,2,5, or 10 4X quadrature
counts per incoming pulse. $35 per board if I remember correctly.

Tim
[Denver, CO]

> -----Original Message-----
>
> Can I just use A or B channel. and pull high the open line.
> These are Gecko drives. Just don't need the resolution. Would lower
> pulses per second.
>
> Frank
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/