Re: [CAD_CAM_EDM_DRO] windows doesn't "find" scanner

When I first got my scanner, I found that it helped to delete the printer
first, disconnect the printer cable and install the scanner. Then I'd turn
the scanner off (with the on off switch on the scanner) plug in the printer
and reinstall it. After that, everything worked fine.

Smoke

> Help!
> Last nite I spent 3 hrs trying to get an Epson installed on my puter
> I loaded software,hooked it up all looked good but would not work.
> thought something was fishy when windows didn't detect on start up.
> Today I got a USB scanner,same routine,same result.!
> No detection,no drivers available,
> Is this a windows "issue" or could it possibly be something deeper,
> like mother board?
> One more hint, under control panel, no chance to look for scanner.
> Under add/remove hardware there is "imaging device" . Only thing
> listed there is -camera/Kodack
>
> thanks
> Carl
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>