CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter

Posted by Drew Rogge
on 2001-11-30 10:38:47 UTC
Congratulations Mariss. Glad things worked out for you.

Drew

mariss92705@... wrote:
>
> Hi,
>
> www.geckodrives.com no longer sells our products. They were squatting
> on our name and were repeatedly asked to stop using it. They refused
> so we were forced to go to "cyber-court". Last week a decision was
> handed down in our favor, transfering the domain name to us. This
> transfer will be completed in the next few days.
>
> I just thought I would explain this to those who might be interested.
>
> Mariss
> Geckodrive Inc.

--
Drew Rogge
drew@...

Discussion Thread

p_uhd@f... 2001-11-29 19:12:01 UTC tangential cutter software Tim Goldstein 2001-11-29 19:21:48 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 19:45:11 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Fred Smith 2001-11-29 20:24:14 UTC Re: tangential cutter software Alan Marconett KM6VV 2001-11-29 20:36:35 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software Chris L 2001-11-29 22:14:45 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software dougrasmussen@c... 2001-11-29 22:29:54 UTC Re: tangential cutter software Chris L 2001-11-29 22:37:53 UTC Re: [CAD_CAM_EDM_DRO] Re: tangential cutter software Alan Marconett KM6VV 2001-11-30 00:20:58 UTC Re: tangential cutter software Michael Milligan 2001-11-30 00:28:38 UTC RE: [CAD_CAM_EDM_DRO] tangential cutter software dlantz@a... 2001-11-30 05:01:48 UTC RE: [CAD_CAM_EDM_DRO] Re: tangential cutter software David M. Munro 2001-11-30 06:03:36 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software p_uhd@f... 2001-11-30 06:55:28 UTC Re: tangential cutter p_uhd@f... 2001-11-30 06:56:09 UTC Re: tangential cutter ccs@m... 2001-11-30 07:07:20 UTC Re: [CAD_CAM_EDM_DRO] tangential cutter software ccs@m... 2001-11-30 07:26:21 UTC geckos was Re: tangential cutter mariss92705@y... 2001-11-30 10:34:41 UTC geckos was Re: tangential cutter Drew Rogge 2001-11-30 10:38:47 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter mariss92705@y... 2001-11-30 12:09:41 UTC geckos was Re: tangential cutter Dave Engvall 2001-11-30 16:31:22 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter Brian Walsh 2001-11-30 17:37:10 UTC Re: [CAD_CAM_EDM_DRO] geckos was Re: tangential cutter