Re: [CAD_CAM_EDM_DRO] flat on shaft

Hi Tim, list,

Yes! That would lock the shaft. I'll bet you did it on something
larger then a Sherline, 'tho. ;>)

Alan KM6VV

Tim Goldstein wrote:

>
> I have done it a number of times by just clamping the motor down to the
> table with a hold down clamp pressing on the top of the mounting flange.
> Then I hook the motor to a drive so it locks the shaft. Now happily mill
> away. Very fast.
>
> Tim
> [Denver CO]