RE: [CAD_CAM_EDM_DRO] Re: master 5 control software

Zoomer,
Maybe you can use Gecko servo drives... input Master5 step/direction and
hook the MaxNC motors and encoders to the Gecko??? Art?

-----Original Message-----
From: zoomer199 [mailto:zoomer@...]
Sent: Thursday, 06 December, 2001 2:27 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Re: master 5 control software


Art,

Yes it is the CL series. I was really hoping to you use master5.
Stock software just isnt enough. File managment in DOS is a real
bummer. Not enough gcode support. File size limits making you run a
ramdrive ect... So I assume that there will never be a
windows control for this machine. For those out there looking to
purchase keep this in mind. Ok what about a new heardware, Is this a
option and if so what to get.

--- In CAD_CAM_EDM_DRO@y..., "Art Fenerty" <fenerty@h...> wrote:
> Hi Zoomer:
>
> Is this the MaxNC CL series? If so, the only software I'm aware
of that
> will drive it is the MaxNCcl software.Thats because its a servo
PWM control
> which sends variable length pulses to the motors through the
printer port
> and seems to mutiplex the switches as well. I tried to decode it
for one
> user, but gave up when it became apparent that it would take an
act of God
> to make it work properly under Windows.
>
> Good luck,
> Art
> Master5 Software
> http://users.andara.com/~fenerty/master.htm


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/