Re: [CAD_CAM_EDM_DRO] EMC approved hardware

antson20022 wrote:

> I have been a lurker for some time and now I have to show myself. I
> have loaded EMC-BDI just fine. When loading my monitor worked fine
> but now that I have it installed the monitor is going haywire. I saw
> somewhere that there was a list of hardware that worked with EMC. I'm
> running a AMD-K6 and seems to be fine. I suspect my video card is the
> problem. Is there such a list.

In most versions of XFree86 (the X windows screen server) using these
keys (Ctrl-Alt- right hand Plus Key) will cycle through the possible video
modes. You might try this to see if you can get to a mode your monitor will

sync to. Most likely, you have the monitor setting in /etc/X11/XF86Config
set to a different type than your actual monitor, and because the screen
resolution is higher with that monitor, it selects a mode that is
incompatible
with the actual monitor on the computer. If you can get it to sync up, you
might be able to change the XF86Config file or use a utility to change your
monitor setting.

Jon