Re: [CAD_CAM_EDM_DRO] Re: Voltage recommendation for slosyn kml063f07

In a message dated 09-Dec-01 20:45:38 Central Standard Time, KM6VV@...
writes:

> True, they could be connected in series, but they better be the same
> value and working voltage

AND, you should also have (fairly-high-R) resistors across each separate
capacitor to "divide" the voltage among them relatively-equally. Caps will
otherwise "hog" voltage, and the "hogs" will blow, usually then causing the
OTHER ones to blow, too!


[Non-text portions of this message have been removed]