Re: Re: Cnc PCB drilling machines z axis linear pot
Posted by
Ray
on 2001-12-10 09:05:01 UTC
PeterS
There are engineers and designers who would take exception to a couple of
your pronouncements.
other lists for that. IMHO analogue systems are not inherently less
accurate but they may well be when constructed from hobby grade
components. To the contrary, computation delays, stepped or descrete
resolutions, and rounding errors may well make digital signals less
suitable to a critical task than an analogue system.
As we have come to realize from some digital software designers and
publishers, these systems may need as much care and feeding as an
ocasional fuzzy potentiometer.
RayH
There are engineers and designers who would take exception to a couple of
your pronouncements.
> From: "Peter Seddon" <peter@...><s>
> 4. Are analogue devices and thus less accurateI'm not wanting to start a digital v analog(ue) war here -- there are
> 5. The signal requires conversion to a digital signal before it can be
> used (unless the system is fully analogue).
other lists for that. IMHO analogue systems are not inherently less
accurate but they may well be when constructed from hobby grade
components. To the contrary, computation delays, stepped or descrete
resolutions, and rounding errors may well make digital signals less
suitable to a critical task than an analogue system.
As we have come to realize from some digital software designers and
publishers, these systems may need as much care and feeding as an
ocasional fuzzy potentiometer.
RayH
Discussion Thread
byron@w...
2001-12-09 06:30:22 UTC
Cnc PCB drilling machines z axis linear pot
JanRwl@A...
2001-12-09 20:21:20 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Randy Gordon-Gilmore
2001-12-09 23:21:35 UTC
PCB bits, was Cnc PCB drilling machines
Bill Vance
2001-12-10 00:45:05 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Peter Seddon
2001-12-10 01:23:13 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
ka1bbg
2001-12-10 05:32:20 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Krahabors
2001-12-10 06:34:20 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Bill Vance
2001-12-10 07:27:19 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Ray
2001-12-10 09:05:01 UTC
Re: Re: Cnc PCB drilling machines z axis linear pot
Jon Elson
2001-12-10 09:43:11 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
morerust
2001-12-10 11:06:33 UTC
Re: Cnc PCB drilling machines z axis linear pot
Alan Marconett KM6VV
2001-12-10 11:34:52 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Peter Seddon
2001-12-10 12:20:11 UTC
Re: [CAD_CAM_EDM_DRO] Re: Re: Cnc PCB drilling machines z axis linear pot
Bill Vance
2001-12-10 15:17:26 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Paul Amaranth
2001-12-10 15:34:39 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
JanRwl@A...
2001-12-10 17:34:57 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
JanRwl@A...
2001-12-10 17:35:48 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
ka1bbg
2001-12-10 19:12:32 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
ka1bbg
2001-12-10 19:12:33 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Jon Elson
2001-12-10 20:57:33 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Alan Marconett KM6VV
2001-12-10 21:06:04 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Jon Elson
2001-12-10 21:07:04 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Bill Vance
2001-12-10 21:37:34 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Corey
2001-12-10 22:27:22 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Alan Marconett KM6VV
2001-12-10 23:49:41 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
ka1bbg
2001-12-11 05:50:29 UTC
Re: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot
Scott M. Thomas
2001-12-12 19:21:53 UTC
RE: [CAD_CAM_EDM_DRO] Cnc PCB drilling machines z axis linear pot