CAD CAM EDM DRO - Yahoo Group Archive

Re: EMC and DROs

Posted by rsgoldner
on 2001-12-11 14:28:41 UTC
The encoders are $28 each. The strips are $2 an inch.

www.usdigital.com

--- In CAD_CAM_EDM_DRO@y..., "John Barnwell" <Barnwell@j...> wrote:
> what kind of cost is this route. I am very intrested serring up my
grizzly
> mill drill this way
>
> also I have a MAXNC10 Open loop that I could make closed loop this
way
>
> JB
>
>
> > -----Original Message-----
> > From: rsgoldner [mailto:rgoldner@i...]
> > Sent: Tuesday, December 11, 2001 7:05 AM
> > To: CAD_CAM_EDM_DRO@y...
> > Subject: [CAD_CAM_EDM_DRO] EMC and DROs
> >
> >
> > I am building DROs for my Grizzly mini-mill. Is it possible to
use
> > EMC as the software for this? At this time, the mill will only
have
> > DROs. CNC might be added at a later date. I am using encoders and
> > linear strips from US Digital and will mill some enclosures to
> > protect the strips. The encoders use standard quadrature
encoding.
> > The strips are 360 pulses per inch. In 4X mode that will give me
a
> > resolution of .0006944.
> >
> > Any help appreciated!
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >

Discussion Thread

rsgoldner 2001-12-11 04:04:39 UTC EMC and DROs Jon Elson 2001-12-11 10:17:00 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs John Barnwell 2001-12-11 12:05:00 UTC RE: [CAD_CAM_EDM_DRO] EMC and DROs Paul 2001-12-11 12:42:35 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs William Scalione 2001-12-11 13:00:33 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs Dan Mauch 2001-12-11 13:32:36 UTC RE: [CAD_CAM_EDM_DRO] EMC and DROs rsgoldner 2001-12-11 14:28:41 UTC Re: EMC and DROs ccs@m... 2001-12-12 09:41:30 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs dlantz@a... 2001-12-12 09:44:59 UTC RE: [CAD_CAM_EDM_DRO] EMC and DROs Alan Marconett KM6VV 2001-12-12 11:36:20 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs ccs@m... 2001-12-12 12:10:37 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs Paul 2001-12-12 13:08:39 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs ccs@m... 2001-12-12 13:22:26 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs Paul 2001-12-12 13:36:28 UTC Re: [CAD_CAM_EDM_DRO] EMC and DROs