RE: [CAD_CAM_EDM_DRO] EMC and DROs

what kind of cost is this route. I am very intrested serring up my grizzly
mill drill this way

also I have a MAXNC10 Open loop that I could make closed loop this way

JB

> -----Original Message-----
> From: rsgoldner [mailto:rgoldner@...]
> Sent: Tuesday, December 11, 2001 7:05 AM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] EMC and DROs
>
>
> I am building DROs for my Grizzly mini-mill. Is it possible to use
> EMC as the software for this? At this time, the mill will only have
> DROs. CNC might be added at a later date. I am using encoders and
> linear strips from US Digital and will mill some enclosures to
> protect the strips. The encoders use standard quadrature encoding.
> The strips are 360 pulses per inch. In 4X mode that will give me a
> resolution of .0006944.
>
> Any help appreciated!
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>