Re: Do you really need an A (axis)
Posted by
mszollar
on 2001-12-18 13:36:48 UTC
Perfect, thanks.
--- In CAD_CAM_EDM_DRO@y..., "follicely_challenged"
<dave_pearson@b...> wrote:
--- In CAD_CAM_EDM_DRO@y..., "follicely_challenged"
<dave_pearson@b...> wrote:
> Ken,but
>
> > My understanding is that this can be done using CAD (Dolphin?)
> > since it's an index could be added using manual edit of the NC.It
> > sounds simular to reindexing the part manually, but the A wouldlet
> > you do it automatically (yes?)either
>
> Indexing would be handled by the Dolphin CAM system, you can
> use the comment function to 'manually' add the required 'index'code
> to the G code program, e.g. M81, or, you can have a 'postprocessor
> function' which can be tailored to suit the output you require.
> For example, some 4th axis, when used for indexing, also require
> a 'clamp/unclamp' signal to be output.
>
> HTH
>
> Dave Pearson
Discussion Thread
mszollar
2001-12-18 08:26:24 UTC
Do you really need an A (axis)
Michael Milligan
2001-12-18 08:49:40 UTC
RE: [CAD_CAM_EDM_DRO] Do you really need an A (axis)
Bill Vance
2001-12-18 09:44:24 UTC
Re: [CAD_CAM_EDM_DRO] Do you really need an A (axis)
mszollar
2001-12-18 11:28:02 UTC
Re: Do you really need an A (axis)
follicely_challenged
2001-12-18 12:55:01 UTC
Re: Do you really need an A (axis)
Carol & Jerry Jankura
2001-12-18 13:10:08 UTC
RE: [CAD_CAM_EDM_DRO] Do you really need an A (axis)
mszollar
2001-12-18 13:36:48 UTC
Re: Do you really need an A (axis)