Re: Re: running the BDI EMC on a real machine

>    From: "Les Watts" <leswatts@...>
> Subject: Re: running the BDI EMC on a real machine
>
> Hello, David!
>
> It is good to hear a few people (a VERY few) have EMC up
> and running with full servo drive being calculated by the software.

"(a VERY few)"is NOT quite a complete answer. Perhaps a better answer
would be that a few English/US speaking people have EMC up ... with
servos. The folk I visited in Germany, Netherlands, and Belgium were/are
all running servo versions. From what offers of visits I've had from
other parts of Europe and the former S-Union the same holds there.

Rumor has it that whole factories/shops are running the EMC in the Slovak
Republic. I misspelled the Czech republic in a post a while back and I've
heard from at least two people there who are working with parts of the EMC
servo software. There is also a Tree Mill being fitted with EMC and
servos in Monterey, Mexico. I believe that Enrique is on this list.

"And China!" or was that Monty Python.

Ray