Re: [CAD_CAM_EDM_DRO] Stainless tubing

Dave,
Send me your address and I will get you some out of my scrap at the
hanger. If I remember right its .750 tubing with .120 wall SS 316. Give me a
couple of days to round it up.

Tony

----- Original Message -----
From: "dave_ace_me" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Wednesday, January 02, 2002 5:13 PM
Subject: [CAD_CAM_EDM_DRO] Stainless tubing


> Hi all,
>
> I've been trying to find stainless tubing with
> a heavy wall, 0.75" OD , 0.1" wall or more, but have had no luck.
>
> I only need an 18 inch long piece, but am wary of
> trying to drill that length.
>
> I need to use this in a couple of pillow block bearings so OD
> dimmention is important.
>
> McMaster sells ground hollow shafting , but they start at 1.5 inches
> OD.
>
> can anyone point me in the proper dirrection ?
>
> TIA,
>
> Dave
>
>
>
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>