Re: Stainless tubing

on 2002-01-02 18:14:56 UTC

Hi Tony,

Thank you.

I'll send you an e-mail directly.

Dave

--- In CAD_CAM_EDM_DRO@y..., "Tony Dickson" <antson@c...> wrote:
> Dave,
> Send me your address and I will get you some out of my scrap at
the
> hanger. If I remember right its .750 tubing with .120 wall SS 316.
Give me a
> couple of days to round it up.
>
> Tony
>
> ----- Original Message -----
> From: "dave_ace_me" <davemucha@j...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Wednesday, January 02, 2002 5:13 PM
> Subject: [CAD_CAM_EDM_DRO] Stainless tubing
>
>
> > Hi all,
> >
> > I've been trying to find stainless tubing with
> > a heavy wall, 0.75" OD , 0.1" wall or more, but have had no luck.
> >
> > I only need an 18 inch long piece, but am wary of
> > trying to drill that length.
> >
> > I need to use this in a couple of pillow block bearings so OD
> > dimmention is important.
> >
> > McMaster sells ground hollow shafting , but they start at 1.5
inches
> > OD.
> >
> > can anyone point me in the proper dirrection ?
> >
> > TIA,
> >
> > Dave
> >
> >
> >
> >
> >
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >

Discussion Thread