Running Uniploar motors as Bipolar motors.
Posted by
j.guenther
on 2002-01-11 12:42:48 UTC
Hi all,
I have some Pacific Scientific 8 wire unipolar motors rated at 5.47 volts at
.489 amps. I am currently running these at 38 volts 1 amp in a parallel
configration on a Bipolar Chopper driver. The motors don't seem to be
getting hot, only slightly warm to the touch. Is this current setting Ok or
am I asking for trouble?
John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia
I have some Pacific Scientific 8 wire unipolar motors rated at 5.47 volts at
.489 amps. I am currently running these at 38 volts 1 amp in a parallel
configration on a Bipolar Chopper driver. The motors don't seem to be
getting hot, only slightly warm to the touch. Is this current setting Ok or
am I asking for trouble?
John Guenther
'Ye Olde Pen Maker'
Sterling, Virginia
Discussion Thread
j.guenther
2002-01-11 12:42:48 UTC
Running Uniploar motors as Bipolar motors.
Art Fenerty
2002-01-11 12:46:23 UTC
Re: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors.
Tim Goldstein
2002-01-11 13:46:17 UTC
RE: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors.
JanRwl@A...
2002-01-11 13:46:56 UTC
Re: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors.
mariss92705
2002-01-11 13:54:59 UTC
Re: Running Uniploar motors as Bipolar motors.
Chris L
2002-01-11 17:00:39 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running Uniploar motors as Bipolar motors.
mariss92705
2002-01-11 18:20:53 UTC
Re: Running Uniploar motors as Bipolar motors.
Chris L
2002-01-11 18:50:49 UTC
Re: [CAD_CAM_EDM_DRO] Re: Running Uniploar motors as Bipolar motors.