CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Running Uniploar motors as Bipolar motors.

Posted by Chris L
on 2002-01-11 17:00:39 UTC
mariss92705 wrote:

> Hi,
>
> If an 8-wire motor has a 1A unipolar rating and you have a full step
> or half step drive, then:
>
> Use 1A if you are running the motor with a unipolar drive (6 wire)
> Use 1A if you are running half-winding bipolar.
> Use 1.41A if you are running parallel bipolar.
> Use 0.707A if you are running series bipolar.
> Use 0.707A if you are running full-winding bipolar.
>
> If you are using a microstep drive and you want optimum smoothness,
> then:
>
> Use 1A if you are running half-winding bipolar.
> Use 0.500A if you are running full-winding bipolar.
>
> If you are using a microstep drive, you want optimum smoothness and
> you have the new "square" motors, then:
>
> Use 1.41A if you are running half-winding bipolar.
> Use 0.707A if you are running full-winding bipolar.
>
> Confusing, isn't it?
>
> Mariss
>

Oh, I don't know.... Actually, I would recommend decoupling the vector
controlled anhydrous crankelshaft by deshimming the phase tensor decraminator
before you tried anything as risky as that.



Disclaimer: I could not help applying this fine statement to Mariss'
explanation of the many stepper connection options above. BOTH statements
take me a really long time to figure out !

This is actually someone elses "line", I just copied it a long time ago. I
must say that whoever penned this has reflected pure brilliance. I use it to
sound "smart" in all kinds of personal E-Mails.

Anyone know who it was who said this? It was probably from someone in the old
Usenet CNC group....................

Chris L

Discussion Thread

j.guenther 2002-01-11 12:42:48 UTC Running Uniploar motors as Bipolar motors. Art Fenerty 2002-01-11 12:46:23 UTC Re: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors. Tim Goldstein 2002-01-11 13:46:17 UTC RE: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors. JanRwl@A... 2002-01-11 13:46:56 UTC Re: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors. mariss92705 2002-01-11 13:54:59 UTC Re: Running Uniploar motors as Bipolar motors. Chris L 2002-01-11 17:00:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Running Uniploar motors as Bipolar motors. mariss92705 2002-01-11 18:20:53 UTC Re: Running Uniploar motors as Bipolar motors. Chris L 2002-01-11 18:50:49 UTC Re: [CAD_CAM_EDM_DRO] Re: Running Uniploar motors as Bipolar motors.