Re: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors.

John:

Slightly warm is where you wanna be. IMO

Art
Master5 Software
http://users.andara.com/~fenerty/master.htm

----- Original Message -----
From: "j.guenther" <j.guenther@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 11, 2002 3:48 PM
Subject: [CAD_CAM_EDM_DRO] Running Uniploar motors as Bipolar motors.


> Hi all,
>
> I have some Pacific Scientific 8 wire unipolar motors rated at 5.47 volts
at
> .489 amps. I am currently running these at 38 volts 1 amp in a parallel
> configration on a Bipolar Chopper driver. The motors don't seem to be
> getting hot, only slightly warm to the touch. Is this current setting Ok
or
> am I asking for trouble?
>
> John Guenther
> 'Ye Olde Pen Maker'
> Sterling, Virginia
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>